How To Install New Hdd In Macbook Pro
A new hard drive to replace Screwdriver /listNum Once you have all the things listed above, here’s how you can upgrade your MacBook Pro’s hard drive: Phase 01: Back Up Your Data Launch Time Machine Click the Apple logo, click System Preferences, and click Time Machine. This launches the Time Machine app. Start unscrewing the bottom with the P0 screwdriver. Pay attention to where the long screws go. Find the hard drive. Unscrew this little holder arm with the P0. Today I’m going to show you how to install a new SSD in your Retina MacBook Pro. Adding a new SSD can give you internal speeds and storage capacities beyond what Apple provides. This works with the 2012 and 2013 MacBook Pros with the identifier of MacBookPro10,1 for the 15″ and MacBookPro10,2 for the smaller 13″ with a SATA based SSD. The hard disk drive is located to the left of the battery when you open the back of your MacBook Pro. The replacement drive must be a 2.5-inch drive with a Serial ATA (SATA) connector. It continues with detailed instructions, complete with drawings, which absolutely should be read in their entirety before one replaces the hard drive.
Today I’m going to show you how to install a new SSD in your Retina MacBook Pro. Adding a new SSD can give you internal speeds and storage capacities beyond what Apple provides. This works with the 2012 and 2013 MacBook Pros with the identifier of MacBookPro10,1 for the 15″ and MacBookPro10,2 for the smaller 13″ with a SATA based SSD. Newer Thunderbolt 2 MacBook Pros use a PCI-E SSD, which while would use the same process, do not yet have a replacement part available. The drive we are using today is a OWC Aura for the MacBook Pro that has been provided by the company. However, this guide is applicable for any compatible third party SSD drive. The MacBook Air also uses a very similar process.
Also be advised that while this is a simple process, any damaged cause by the use or installation of third party SSDs are not covered by AppleCare. This installation is not advised for anyone not comfortable working on computers or electronics.
Items Needed
- 2012 or 2013 13 or 15″ MacBook Pro with Thunderbolt 1
- Compatible SSD Module such as or Transcend Jet Drive 720/725
- USB 3.0 enclosure for MacBook Pro SSD
- T5 Torx Screwdriver
- P5 (aka Ts5) Pentalobe Screwdriver
- Clean, static free working area
Step 1: Backup, Backup, and Make Darn Sure you Backup
Whether its Time Machine or a third-party solution, make sure all your data is backed up to another drive or server… or two or three. DO NOT start unless you have all your data on your internal SSD backed up. Even if it takes a while, you can afford to wait.
Step 2: Insert New Drive Into External Enclosure
This step is technically optional, but prefer to have my drive cloned and setup before installing it in my computer. You can also clone the drive after installation.
Also, make sure your workspace is clean and free from any metal devices while working with drives.
Take the USB 3.0 enclosure and slide it open.
Remove the new SSD from the static bag. Insert it into the SATA connector, it should easily install with little to no effort. Take the included short T5 screw and install it into the screw hole at the end of the SSD. Make sure it is secure, but don’t over tighten it.
Now slide the cover back on. Install the two larger T5 screws at the end of enclosure. The drive is now installed. You can now insert the USB 3.0 cable and plug it into your Mac.
Step 3: Cloning Your Boot drive
You now need to get your data to the new drive. The easiest way to do this is by cloning your drive. While you can do this with Disk Utility, I highly recommend a shareware utility called Carbon Copy Cloner. While this is a powerful backup utility, it makes cloning a drive easy.
You may be asked if you want to purchase Carbon Copy Cloner or use this software as a 30-day trial. While, like SuperDuper!, it is definitely worth paying for, you can use the free trial for cloning this drive. I highly recommend using Carbon Copy Cloner over other methods because it checks for the OS X Recovery Partition and installs it if it’s not present of the disk. The recovery partition takes the place of your OS x Boot CD in newer MacBooks that don’t have an optical drive. If you don’t have a recovery partition, your Mac would need a bootable copy of OS X on another disk to be able to recovery from an issue with the OS.
Your first step is to choose your Source drive. This will be your original internal SSD. Now Click on your Destination, this will be your new drive. There is a schedule box, but you don’t have to worry about this. Click on Clone.
You’ll now be asked if you want to install a helper tool. Put into your administrator login and click on Install Helper.
Now wait for the drive to clone. This may take up to half an hour or more. Once done, it will tell you the task has been completed. You now quit Carbon Copy Cloner.
Step 4: Opening Your MacBook Pro
Turn your MacBook upside down and place it on your work area. There are 10 Pentalobe screws holding the bottom plate on. On screw them and keep them in a safe place. They are small and easy to lose. Remove the bottom cover and place it out of the way. If its dirty and you have a cloth, you should take this time to clean the dust off the panel.
Now gently unhook the battery connector. Its beneath a triangle warning symbol. Once dislodged, pull the connector up slightly so it won’t reconnect while you’re working.
Unscrew the single pentalobe screw holding in the SSD. Remove the old SSD and insert the new one. Iconstix 3 9900. That may include removing the new SSD from the enclosure. Place the old SSD in either the enclosure or the static free bag.
Mooney m20c manual. Now replace the screw and plug back in the battery connector. Now replace the bottom panel and its 10 screws.
Step 5: Power Up Your Mac
Turn it back over and restart the Mac. If it starts regularly, you’re done. You may have to reset a couple settings, but given the clone of the hard drive, it should behave exactly like it did before, only a bit faster and with more storage if you went with a larger SSD.
Final Thoughts
Now you’ve upgraded your MacBook Pro with a new and faster MacBook Pro.
Reinstall from macOS Recovery
macOS Recovery makes it easy to reinstall the Mac operating system, even if you need to erase your startup disk first. All you need is a connection to the Internet. Windows para macbook air 5th generation. If a wireless network is available, you can choose it from the Wi-Fi menu , which is also available in macOS Recovery.
1. Start up from macOS Recovery
To start up from macOS Recovery, turn on your Mac and immediately press and hold one of the following sets of keys on your keyboard. Release the keys when you see an Apple logo, spinning globe or other startup screen.
Command (⌘)-R
Reinstall the latest macOS that was installed on your Mac (recommended).
Option-⌘-R
Upgrade to the latest macOS that is compatible with your Mac.
Shift-Option-⌘-R
Reinstall the macOS that came with your Mac, or the closest version that's still available.
You may be prompted to enter a password, such as a firmware password or the password of a user who is an administrator of this Mac. Enter the requested password to continue.
When you see the utilities window, that means you have started up from macOS Recovery.
2. Decide whether to erase (format) your disk
How To Install New Hdd In Macbook Pro Mac
You probably don't need to erase your disk, unless you're selling, trading in or giving away your Mac, or you have an issue that requires you to erase it. If you need to erase it before installing macOS, select Disk Utility from the Utilities window, then click Continue. Find out more about when and how to erase your disk.
3. Install macOS
When you're ready to reinstall macOS, choose Reinstall macOS from the Utilities window. Then click Continue and follow the on-screen instructions. You will be asked to choose a disk on which to install.
- If the installer asks to unlock your disk, enter the password you use to log in to your Mac.
- If the installer can't see your disk or notifies you that it can't install macOS on your computer or volume, you may need to erase your disk first.
- If the installer is for a different version of macOS than expected, find out about macOS Recovery exceptions.
- If the installer offers you the choice between installing on Macintosh HD or Macintosh HD – Data, choose Macintosh HD.
Please allow the installation to finish without putting your Mac to sleep or closing its lid. Slot nuts casino reviews tripadvisor. During the installation process, your Mac may restart and display a progress bar on the screen several times, and the screen may be blank for minutes at a time.
If your Mac restarts to a setup assistant, but you're selling, trading in or giving away your Mac, press Command-Q to quit the assistant without completing the setup process. Then click Shut Down. When the new owner starts up the Mac, they can use their own information to complete the setup process.
macOS Recovery exceptions
The version of macOS offered by macOS Recovery may vary in some cases:
- If macOS Sierra 10.12.4 or later has never been installed on this Mac, Option-Command-R installs the macOS that came with your Mac, or the closest version that's still available. And Shift-Option-Command-R isn't available.
- If you erased your entire disk instead of just the startup volume on that disk, macOS Recovery may only offer the macOS that came with your Mac, or the closest version that's still available. You can upgrade to a later version afterwards.
- If your Mac has the Apple T2 Security Chip and you've never installed a macOS update, Option-Command-R installs the latest macOS that was installed on your Mac.
- If you've just had your Mac logic board replaced during a repair, macOS Recovery may only offer the latest macOS that is compatible with your Mac.
If you can't get macOS Recovery to offer the installer you want, you may be able to use one of the other ways to install macOS.
Other ways to install macOS
How To Install New Hdd In Macbook Pro 2020
- You can also install macOS from the App Store or Software Update preferences. If you can't install macOS Catalina, you may be able to install an earlier macOS, such as macOS Mojave, High Sierra, Sierra, El Capitan or Yosemite.
- Or, create a bootable installer disk and then use that disk to install macOS on your Mac or another Mac.
